Kam XY Laser RBP Instruction Manual download pdf (Page 10)

REN (remote control) mode

Press the menu button until rEN is displayed

Press enter to confirm selection

The unit is now in remote control function and will operate from the controls on the supplied infrared remote control.

Using the remote in Master/Slave mode

Set the first unit to REN mode and all other units in SLA. The remote will control all units in the DMX chain.

Remote control

The unit can be operated by the supplied remote control. Make sure the unit is powered up and working, if no lasers are showing,

press the red power button on the remote (A). Use this button to place the unit in standby mode when it is not needed. To

completely turn the unit off, remove the power supply. The remote control’s Auto button (C) sets the unit to Auto mode (see

above). The Music button (B) sets the unit to Sound-to-Light mode. The two outer buttons in the second row of the remote (D and

E) control the colour that the unit displays. The middle button of the second row (F) pauses the effect. (G) ABC do not have a

function on this unit, 1-9 selects pre programmed patterns. (H) returns patterns to the beginning.

Test mode (tst)

When the laser is in test mode this will only display a test image

This is for service purposes only

1 2 ... 5 6 7 8 9 10 11 12 13

No comments

Kam XY Laser RBP Instruction Manual Page 10